{ "nodes": [ { "id": "gSound", "type": "group", "x": -30, "y": -60, "width": 520, "height": 1700, "label": "Sound path (top to bottom)", "color": "2" }, { "id": "gCtrl", "type": "group", "x": 540, "y": -60, "width": 460, "height": 1700, "label": "Control inputs: columns H to P", "color": "6" }, { "id": "title", "type": "text", "x": -560, "y": -560, "width": 1560, "height": 380, "text": "# Syntrx II signal path\nThe matrix is the patch cables between five steps, just like a classic synth: **make a sound, shape its tone, shape its volume, add color and space, send it out.**\n\nEvery arrow on this board is one lit dot on the grid. Orange is sound, purple is control, yellow is timing, green is where you hear it.\n\nFull guide: [Syntrx II guide](https://sonicdiscoverystudio.com/syntrx-ii/)" }, { "id": "read", "type": "text", "x": -560, "y": 0, "width": 460, "height": 560, "text": "## How to read a dot\n- A dot always runs from its **row** (an output) into its **column** (an input).\n- A module's **row** is where its sound leaves. Its **column** is where sound goes in.\n- So the **row comes before**, the **column comes after**.\n- Columns **A and C** are the output channels. They have no row, so they are always the last step.\n- Nothing is heard until a chain reaches **A or C**.\n- Columns **H to P** don't carry sound. They turn a knob for you.\n- The order you light dots doesn't matter. Light the output first so you hear each step as you build." }, { "id": "src", "type": "text", "x": 0, "y": 0, "width": 460, "height": 280, "text": "## 1 Sources (required)\nMakes the sound.\n- Row 1 Osc 1 pulse, row 2 Osc 1 sine\n- Row 3 Osc 2\n- Rows 4, 5 Osc 3\n- Row 6 Noise, row 7 Input 1, row 9 Input 2\n\nEach has a LEVEL knob. LEVEL down sends nothing.\nShortest patch: row 1 straight to column A.", "color": "2" }, { "id": "flt", "type": "text", "x": 0, "y": 380, "width": 460, "height": 220, "text": "## 2 Filter (optional)\nShapes the tone: HPF, LPF or both. RESONANCE adds a ringing peak.\n\n**In:** column G **Out:** row 10", "color": "2" }, { "id": "vca", "type": "text", "x": 0, "y": 700, "width": 460, "height": 240, "text": "## 3 Trapezoid VCA (optional, in most patches)\nShapes the volume over time: ATTACK, ON, DECAY, OFF.\nLoops on its own until OFF is turned past 9.\n\n**In:** column D **Out:** row 12", "color": "2" }, { "id": "ring", "type": "text", "x": 0, "y": 1040, "width": 220, "height": 260, "text": "## 4a Ring mod\nBells and robot voices. Needs A and B or it's silent.\n\n**In:** column E\n**Out:** row 13", "color": "2" }, { "id": "fx", "type": "text", "x": 240, "y": 1040, "width": 220, "height": 260, "text": "## 4b Effects\nDelay or reverb. Wet only.\n\n**In:** column F\n**Out:** row 14", "color": "2" }, { "id": "out", "type": "text", "x": 0, "y": 1400, "width": 460, "height": 220, "text": "## 5 Output channels (required)\n**Ch1 = column A, Ch2 = column C.**\nLEVEL, PAN and tone per channel, then the jacks and headphones.\nColumn B feeds the scope.", "color": "4" }, { "id": "tPitch", "type": "text", "x": 570, "y": 0, "width": 400, "height": 280, "text": "## Pitch and shape\n- **H** Osc 1 pitch\n- **I** Osc 2 pitch\n- **J** Osc 3 pitch\n- **K** shape\n\nAudio here gives buzzy, metallic FM sounds.", "color": "6" }, { "id": "tCut", "type": "text", "x": 570, "y": 380, "width": 400, "height": 220, "text": "## Cutoff\n- **N** filter frequency\n\nClassic: Osc 3 for a slow sweep, the trapezoid for a \"wow\" on every note.", "color": "6" }, { "id": "tDec", "type": "text", "x": 570, "y": 700, "width": 400, "height": 240, "text": "## Decay and random\n- **L** trapezoid DECAY time\n- **M** sample and hold input (feeds the Random section)", "color": "6" }, { "id": "tFx", "type": "text", "x": 570, "y": 1040, "width": 400, "height": 260, "text": "## Effects\nMostly the knobs. Hold REC/CLEAR while turning TIME to record its motion.", "color": "6" }, { "id": "tOut", "type": "text", "x": 570, "y": 1400, "width": 400, "height": 220, "text": "## Output level\n- **O** Ch1 level\n- **P** Ch2 level\n\nTremolo, ducking and auto panning.", "color": "6" }, { "id": "cOsc3", "type": "text", "x": 1080, "y": 0, "width": 400, "height": 240, "text": "## Osc 3 as LFO\nRows 4, 5\nWobble, vibrato, sweeps.", "color": "6" }, { "id": "cRand", "type": "text", "x": 1080, "y": 340, "width": 400, "height": 240, "text": "## Random\nRow 5, switch on S&H\nStepped voltages from whatever goes into column M.", "color": "6" }, { "id": "cTrap", "type": "text", "x": 1080, "y": 680, "width": 400, "height": 240, "text": "## Trapezoid CV\nRow 11\nThe envelope's shape as a voltage. TRAPEZOID knob sets depth.", "color": "6" }, { "id": "cEF", "type": "text", "x": 1080, "y": 1020, "width": 400, "height": 240, "text": "## Envelope follower\nRow 8\nHow loud Input 1 is, as a voltage.", "color": "6" }, { "id": "cJoy", "type": "text", "x": 1080, "y": 1360, "width": 400, "height": 240, "text": "## Joystick\nRows 15, 16\nYour hand, MIDI CCs and the sequencer's modulation lanes.", "color": "6" }, { "id": "cHead", "type": "text", "x": 1080, "y": -240, "width": 400, "height": 160, "text": "## Control sources\nThese rows send a dot into a purple column to move a setting.", "color": "6" }, { "id": "gate", "type": "text", "x": -560, "y": 700, "width": 460, "height": 420, "text": "## Timing: gates\nGates never go through the matrix. All of these merge into one gate automatically:\n- GATE/SEQ button\n- MIDI notes\n- Gate jack\n- Sequencer and recorded gate pattern\n- Input 1 with TO GATE on\n\nThe gate starts the trapezoid (when OFF is past 9) and the Random section (when set to GATE).", "color": "3" }, { "id": "back", "type": "text", "x": -560, "y": 1240, "width": 460, "height": 380, "text": "## Silent? Read backward\n1. Look at columns **A** and **C**. Find the lit row.\n2. That row is the last step. Find its input column.\n3. See what lights that column.\n4. Keep going until you reach a source.\n\nIf the trail stops before a source, that's the gap.", "color": "4" } ], "edges": [ { "id": "e0", "fromNode": "src", "fromSide": "bottom", "toNode": "flt", "toSide": "top", "label": "dot: source row to column G", "color": "2" }, { "id": "e1", "fromNode": "flt", "fromSide": "bottom", "toNode": "vca", "toSide": "top", "label": "dot: row 10 to column D", "color": "2" }, { "id": "e2", "fromNode": "vca", "fromSide": "bottom", "toNode": "ring", "toSide": "top", "label": "row 12 to E", "color": "2" }, { "id": "e3", "fromNode": "vca", "fromSide": "bottom", "toNode": "fx", "toSide": "top", "label": "row 12 to F", "color": "2" }, { "id": "e4", "fromNode": "ring", "fromSide": "bottom", "toNode": "out", "toSide": "top", "label": "row 13 to A or C", "color": "2" }, { "id": "e5", "fromNode": "fx", "fromSide": "bottom", "toNode": "out", "toSide": "top", "label": "row 14 to A or C", "color": "2" }, { "id": "e6", "fromNode": "vca", "fromSide": "left", "toNode": "out", "toSide": "left", "label": "dry: row 12 to A or C", "color": "2" }, { "id": "e7", "fromNode": "tPitch", "fromSide": "left", "toNode": "src", "toSide": "right", "label": "moves", "color": "6" }, { "id": "e8", "fromNode": "tCut", "fromSide": "left", "toNode": "flt", "toSide": "right", "label": "moves", "color": "6" }, { "id": "e9", "fromNode": "tDec", "fromSide": "left", "toNode": "vca", "toSide": "right", "label": "moves", "color": "6" }, { "id": "e10", "fromNode": "tOut", "fromSide": "left", "toNode": "out", "toSide": "right", "label": "moves", "color": "6" }, { "id": "e11", "fromNode": "cOsc3", "fromSide": "left", "toNode": "gCtrl", "toSide": "right", "color": "6" }, { "id": "e12", "fromNode": "cRand", "fromSide": "left", "toNode": "gCtrl", "toSide": "right", "color": "6" }, { "id": "e13", "fromNode": "cTrap", "fromSide": "left", "toNode": "gCtrl", "toSide": "right", "color": "6" }, { "id": "e14", "fromNode": "cEF", "fromSide": "left", "toNode": "gCtrl", "toSide": "right", "color": "6" }, { "id": "e15", "fromNode": "cJoy", "fromSide": "left", "toNode": "gCtrl", "toSide": "right", "color": "6" }, { "id": "e16", "fromNode": "gate", "fromSide": "right", "toNode": "vca", "toSide": "left", "label": "starts it", "color": "3" } ] }